:: Peel-off Mats ::

A Peel-off Mat is a stack of sheets of polyethylene film, with a specially treated pressure sensitive adhesive on one side, upon which persons entering a cleanroom walk (and vehicles are rolled) to remove the last trace of contamination on shoe heels and soles, and on the wheels. When a sheet becomes loaded with contamination, it is peeled off, exposing a new clean sheet for use, thus eliminating messy and time-consuming cleaning and washing.

Instructions
First, remove the protective covering from the adhesive bottom sheet, and lay the mat on the floor or in a frame. Step on the mat (especially the edges) to positively secure it to the floor.

Second, remove the protective film on the top of the mat. The mat is now ready for use. When the exposed sheet is contaminated, peel it off and discard it, exposing a new clean sheet for use.

CleanMat
Cleanroom Sticky Mat

• Acrylic solvent based adhesive with LDPE backing
• Each layer is individually tabbed for easy removal.
  When the top sheet is soiled, it can be easily
  peeled off to expose a fresh, clean surface
• High durability, without pin-hole and adequate     
  adhesiveness along its full length
• Dead-fold characteristics
• Rupture Elongation factor > 250%
• Tensile strength > 170 Kg/cm
• Adhesive force (g/25mm): 400 ± 100
• Thickness: 50 ± 5mm

Description Color Sizes Packaging Add to Cart CleanMat Sticky Mat Blue 24”x36” 30 SHEETS/MAT, 10 MATS/CS 26”X45” 30 SHEETS/MAT, 10 MATS/CS

CleanGuard
Anti-Microbial Sticky Mat

• 30-layer adhesive coated multilayered mat
• Coated with a nontoxic antimicrobial agent
• Protects against bacteria, mold and mildew
• Eliminates contaminant build-up
• Numbered corner tabs for accurate layer removal
• Antimicrobial efficacy test showed a 98-99%
  reduction of bacteria on the mat. Test results
  available on request
 

Description Color Sizes Packaging Add to Cart CleanGuard Anti-Microbial Sticky Mat Green 600 x 900mm 30 SHEETS/MAT, 10 MATS/CS 660 x 1143mm 30 SHEETS/MAT, 10 MATS/CS

CleanGuard Mats effectively resist the following organisms:

CleanStat
Anti-static Sticky Mat

• Acrylic solvent based adhesive with LDPE backing
• Numbered corner tabs for accurate layer removal
• Self-adhesive base holds floor securely yet easy
  to remove and leaves no  residue
• Use with or without frame
• Surface Resistivity:
    Surface - 3x10¹³ ohms/square,
    Adhesive side: 3.5x10⁹ ohms/square
• Tack: 178 g/25mm (JIS-Z-02370)
• Leakage resistance: 100~300 MΩ
• Thickness: Polyethylene film 60μ /Pressure sensitive adhesive 10μ

Description Color Sizes Packaging MOQ Add to Cart CleanStat Sticky Mat White 24”x36” 30 SHEETS/MAT, 10 MATS/CS 1 CS 26”X45” 30 SHEETS/MAT, 10 MATS/CS 4 CS

Sticky Mat Frame

• Provides a uniform and effective base for
  adhering Sticky Mats securely, yet
  permitting easy removal of the last sheet,
  eliminating the problems created by floors of
  widely varying materials
• Frames can be simply laid on the floor
  permanently lagged to the floor, or held in
  place by either a non-skid base or double-faced
  tape
• Works extremely well with all Sticky Mat bottom
  adhesives
• No maintenance required
• Enhances appearance of mats
• Pre-assembled, ready to use
• Available in 2 materials: Rubber or Aluminum

Description Color Sizes Packaging MOQ Add to Cart Rubber Frame Green 24”x36” 5 EA/CS 1 CS 26”X45” 5 EA/CS 1 CS 600 x 900mm 5 EA/CS 1 CS 660 x 1143 mm 5 EA/CS 1 CS Aluminum Frame Aluminum 24”x36” 1 EA/PK 2 EA 26”x45” 1 EA/PK 2 EA